MODEL
625D
| MANUFACTURER MODEL |
John Deere 625D |
|||
|
||||
| Cutterbar | ||||
|
||||
| Type | Straight line knife drive system | |||
|
|
|||
| Length, ft. (m) | 25-ft (7.62m) | |||
|
|
|||
| Knife drive | Base single; Optional Dual Knife | |||
|
|
|||
| Knife speed | 520 cycles/min (1040 strokes/min) | |||
|
|
|||
| Cutterbar tilt | Base Hydraulic (9 degrees tilt max) | |||
|
|
|||
| Pickup Reel | ||||
|
||||
| Number of slats | 6 bat poly base; 8 bat steel optional (for tough feeding conditions) | |||
|
|
|||
| Fingers | Nylon (steel optional typically used in rice or tough conditions) | |||
|
|
|||
| Diameter, in. (mm) | 42-in (1067mm); 54-in (1371mm) for tough feeding conditions | |||
|
|
|||
| Height control | Hydraulic | |||
|
|
|||
| Speed control | Hydraulic | |||
|
|
|||
| Reel lift, in. (mm) | 13.0-in (330mm) Cylinder stroke; 15.4-in (391.5 mm) Total Range | |||
|
|
|||
| Reel fore and aft, in. (mm) | 14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range | |||
|
|
|||
| Reel resume | Base | |||
|
|
|||
| Reel reverse | Base | |||
|
|
|||
| Operating speeds, rpm | 6-54 rpm | |||
|
|
|||
| Operating speeds, rpm (54-in. reel) | 5-44 rpm | |||
|
|
|||
| Slat Reel | ||||
|
||||
| Number of slats | --- | |||
|
|
|||
| Diameter, in. (mm) | --- | |||
|
|
|||
| Height control | --- | |||
|
|
|||
| Speed control | --- | |||
|
|
|||
| Operating speeds, rpm | --- | |||
|
|
|||
| Draper Belts | ||||
|
||||
| Width, in. (mm) | 24-oz rubber coated polyester with V-Guide tracking; Side belts 40-in (1016mm); Center belts 55-in (1397mm) | |||
|
|
|||
| Clean height, in. (mm) | 1-in (25.4mm) | |||
|
|
|||
| Operating speed, ft./min. (m/min.) | Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min) | |||
|
|
|||
| Speed control | Hydraulic from cab | |||
|
|
|||
| Center belt reverse | Base | |||
|
|
|||
| Feed Drum | ||||
|
||||
| Diameter, in. (mm) | 16-in (406mm) | |||
|
|
|||
| Feed drum fingers | Steel heavy-duty round 5/8-in (16mm) diameter with breakaway notch and retainer | |||
|
|
|||
| Number of fingers | 18 | |||
|
|
|||
| Auger finger platform | Dual Chevron, retracting | |||
|
|
|||
| Finger reach, in. (mm) | 6-in (152mm) | |||
|
|
|||
| Drum/auger reverse | Base | |||
|
|
|||
| Operating speed, rpm | 195 rpm | |||
|
|
|||
| Center clean out door | Base | |||
|
|
|||
| Header Height Sensing | ||||
|
||||
| Type | Electro-Hydraulic Base | |||
|
|
|||
| Header height sensing on the ground | Base | |||
|
|
|||
| Header height sensing off the ground | --- | |||
|
|
|||
| Auxiliary Top Auger | ||||
|
||||
| Type | Optional; hydraulic drive | |||
|
|
|||
| Dimensions | ||||
|
||||
| Platform length, ft. (m) | 27.9-ft (8.49m) | |||
|
|
|||
| Overall operating depth, ft. (m) | 7.9-ft (2.41m) | |||
|
|
|||
| Transport width, field position, ft. (m) | 26.5-ft (8.09m) | |||
|
|
|||
| Transport width on wheel, less dividers, ft. (m) | --- | |||
|
|
|||
| Transport length, hitch extended, ft. (m) | --- | |||
|
|
|||
| Weight | ||||
|
||||
| Approximate weight (slat reel), lb. (kg) | --- | |||
|
|
|||
| Approximate weight (pickup reel), lb. (kg) | 6,613 lb (3000kg) | |||
|
|
|||
| Approximate weight (with transport) lb (kg) | --- | |||
|
|
|||
| Approximate weight (optional 54-in. reel) lb (kg) | 6,724 lb (3050kg) | |||