MODEL
630F
| MANUFACTURER MODEL |
John Deere 630F |
|||
|
||||
| Cutterbar | ||||
|
||||
| Type | 4-in. knife system with in-line gearbox | |||
|
|
|||
| Cutterbar angle | 10 degrees | |||
|
|
|||
| Cutterbar length, ft. (m) | 30 (9.2) | |||
|
|
|||
| Flex cutterbar float range, in. (mm) | 6 (152.4) | |||
|
|
|||
| Tilt adjustment | 17 degrees (located on feederhouse) | |||
|
|
|||
| Knife sections | Heavy-duty, over-serrated | |||
|
|
|||
| Guards | Forged steel, heat-treated | |||
|
|
|||
| Backshaft speed, rpm | 520 | |||
|
|
|||
| Knife speed, cycles/min. | 520 | |||
|
|
|||
| Platform Auger | ||||
|
||||
| Diameter, in. (mm) | 26 (660) | |||
|
|
|||
| Operating speed, rpm | 152, 135 (slow down), 170 (speedup) | |||
|
|
|||
| Reel | ||||
|
||||
| Number for slats | 6 | |||
|
|
|||
| Diameter, in. (mm) | 42 (1067) | |||
|
|
|||
| Reel Controls | ||||
|
||||
| Height control | Hydraulic | |||
|
|
|||
| Speed control | Hydraulic | |||
|
|
|||
| Operating speeds, rpm | 6 to 44 | |||
|
|
|||
| Hydraulics | ||||
|
||||
| Reel motor displacement (per revolution), cu. in. (L) | --- | |||
|
|
|||
| Reel drive system pressure, psi (kPa) | 2000 +/- 150 (14000 +/- 1000) | |||
|
|
|||
| Reel fore/aft stroke, in. (mm) | 14.1 (359) | |||
|
|
|||
| Dimensions | ||||
|
||||
| Cutting width, ft. (m) | 30 (9.14) | |||
|
|
|||
| Gathering width, ft. (m) | 30.1 (9.18) | |||
|
|
|||
| Overall width, ft. (m) | 31.7 (9.98) | |||
|
|
|||
| Approximate weight, lb. (kg) | 5641 (2559) | |||