e23 Transmission 40K, 26 mph (40 km/h): 40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires
Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
Available
Specifications
2018
John Deere
7290R
Base
Row Crop
Rated per 97/68/EC at 2,100 rpm: 290 hp (213.3 kW) | Max per 97/68/EC at 1,900 rpm:319 hp (234.6 kW)
John Deere PowerTech PSS 9.0L Engine: B20
2,100 rpm
Diesel
in-line, 6; wet-sleeve with 4 valves-in-head
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Dual stage
549 cu. in. (9.0 L)
16.0:1
Full-pressure, full-flow filtration with bypass
Replaceable cartridge-style
4.66 in. (118 mm)
5.35 in. (136 mm)
Filter: Two-stage with water separator and service-indicator light | Filter, primary: 10 micron replaceable cartridge with water indication sensor and drain | Filter, secondary: 2 micron spin-on element
Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
PTO: 40%
at 2100 erpm: 242 hp (180.5 kW) | At Engine rpm (Rear): 540/1,000 at 1,950 engine rpm: 540E/1,000E PTO at 1,750 engine rpm | At Engine RPM (front) (1:2 Ratio): 1,000 PTO rpm at 1,940E rpm
power bulge: 10%
e23 Transmission 40K, 26 mph (40 km/h): 40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires
Closed-center, pressure and flow compensated | Selective control valves (SCVs): 3, 4 Standard, 5 and 6 Available
Main, axial piston (displacement): 63 cc standard
2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa)
63 cc pump: 43 U.S. gpm (162 L/min) | 85 cc pump: 59 U.S. gpm (223.3 L/min)
/Battery: 200 amps/12 Volt
Two batteries in parallel | Total cold-cranking amps: 1850 (2-925CCA grp 31 batteries)
Tires Group 47/48/49 tires available as Singles/Duals
front: 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm)
MFWD/TLS: 115.2 in. (2925 mm) | MFWD / TLS axle clearance - 1300 axle, G43 420/85R34 tires: 19.5 in. (495mm)
Hydrostatic power: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel
3 points Rear: Electrohydraulic sensing Category 3/3N with Quik-Coupler: 15,200 lb. (6,895 kg) 9,208 kg max lift | Category 3N/3 with Quik-Coupler: 15,200 lb. (6,895 kg) 9,208 kg max lift | Front: Category 3N, available Premium Front Hitch for use with ground-engaging front implements: 11,464 lb. (5200 kg)
Category 3, 4,050 lb. (1837 kg) - 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position
DEF: 23L (6 gal)
TLS: 26,468 lb (12,005 kg)
AutoTrac Ready | Service ADVISOR™ Remote: Capable with JDLink™ Select & Ultimate | CommandCenter™ 10-inch Display video with 4600 Processor: Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts)